Why Is My AdBlue Warning Light Still On After Filling?
AdBlue Warning Light Still On After Filling? Causes Explained | iFix AdBlue AdBlue warning lights • Fault diagnosis • Mobile specialist Why Is My AdBlue Warning Light Still On After Filling? Topping up your AdBlue is the obvious first step when a warning light appears. But when the light stays on after you’ve refilled, that’s […]
NoX Sensor Delete Explained: Costs, Risks & Mobile Fix
Driving a modern diesel vehicle means relying on a network of sensors—especially the NoX (Nitrogen Oxide) sensor—to keep emissions under control and performance smooth. When a NoX sensor fails, you’ll see warning lights, reduced power, and sometimes limp mode. Rather than pay £300–£700 for a replacement, many drivers opt for a NoX sensor delete. But […]
AdBlue Warning Light Reset: Causes, Fixes & DIY Guide
Is your van’s AdBlue warning light stuck on, even after topping up or fixing a fault? You’re not alone. AdBlue warning lights are one of the most common headaches for UK van owners, often leading to confusion, failed MOTs, or even limp mode. This guide covers the main causes, how to reset the light, and […]
AdBlue Pressure Sensor vs Pump Fault: How to Tell the Difference
U-code diagnostics • NOx comms loss • SCR warnings U029D Fault Code: NOx Sensor Communication Lost (Meaning, Causes, Fix Steps) U029D is not “a bad reading”. It’s a lost conversation between modules. Fixing the comms issue often stops the repeat AdBlue warnings. Call 07349 821 999 Book a mobile visit Mobile across Leicester, Loughborough & […]
Ford 2.0 EcoBlue ECU Coverage: Models Using SID212 & SID213 EVO
Ford EcoBlue • ECU coverage • SID212 EVO • SID213 EVO Ford 2.0 EcoBlue ECU Coverage: Models Using SID212 & SID213 EVO Not every 2.0 EcoBlue runs the same ECU. This guide shows which Ford models commonly use SID212 EVO and SID213 EVO, and why correct ECU identification matters before any software work. Call 07349 […]
Signs Your NoX Sensor Is Failing (and What to Do About It)
Signs Your NOx Sensor Is Failing (and What to Do About It) If your diesel car or van suddenly shows a warning light, reduced power, or repeated SCR messages, the cause is often linked to NOx sensor data. These sensors play a key role in how the ECU evaluates emissions behaviour. When the readings fall […]
P20EE Fault Code: What It Means, What Causes It, and What to Do
P20EE fault code • SCR catalyst • AdBlue system diagnosis P20EE Fault Code: What It Means, What Causes It, and What to Do P20EE is one of the most common AdBlue and SCR fault codes on diesel vans. If your dashboard is showing a warning and a scan has pulled P20EE, here is exactly what […]
AdBlue Fault Codes Explained (P20EE, P204F, P2002 & More)
AdBlue Fault Codes Explained: P20EE, P204F, P2002 & More (UK Guide) I Fix AdBlue | November 2025 Quick Reference: Common AdBlue Fault Codes Fault Code What It Means Common Cause Urgency Level P20EE NOx catalyst efficiency low Failing NOx sensor or AdBlue dosing issue High – triggers countdown P204F AdBlue system performance fault Faulty pump, […]
What Is a Stage 1 Remap and Should You Get One?
What Is a Stage 1 Remap and Should You Get One? Thinking your diesel van or car could use a performance boost without hardware mods? A Stage 1 remap might be the answer. It’s a software tweak to your ECU that delivers more power, better torque and improved fuel economy—often within an hour, and all […]
0 Miles Until No Start? Here’s How to Get Your Van Moving Again
If your dashboard says “0 miles until no start”, you’re not imagining things—it’s a real function in many AdBlue-equipped vehicles. And when it kicks in, your van won’t start again until the system is reset. That’s where a No Start Counter Reset comes in—and why so many drivers are calling iFixAdBlue for mobile help. What […]